Yancheng Gold Bull Generator Manufacturing Co., Ltd.

Products Catalog

5-15KW Single-Cylinder Belt Generator Specification

5-15KW Single-Cylinder Belt Generator Specification Single-Cylinder engine powered 5-15KW

5-15KW Single-Cylinder Belt Generator Specification

MODEL OF GEN-SET 5GF 8GF 10GF 12GF 15GF
Continuous output of gen-set 5KW 8KW 10KW 12KW 15KW
D
I
E
S
E
L

E
N
G
I
N
E
Model XD195(ND) ZH1100(ND) ZH1110(ND) ZH1115(ND) ZH1130(ND)
Type Single cylinder,Horizontal,4-cycle
Combustion System Swirl Swirl Direct Injection Direct Injection Direct Injection
Bore * Stroke(mm) 95×90 100×115 110×115 115×115 130*120
Ttl. Displacement(L) 0.638 0.903 1.093 1.194 1.593
Compression ratio 21:01 20:1 17:1 17:1 17:01
Output/Speed(HP/rpm) 12/2400 16/2200 20/2200 24/2200 33/2200
Starting method Hand Cranking or Starting Motor
Cooling System Radiator
Lubrication System Combined Pressure and Splash
A
L
T
E
R
N
A
T
E
R
Model STC-5 TF(D)W-8KW-4P TF(D)W-10KW-4P TF(D)W-12KW-4P TF(D)W-15KW-4P
Rated power 5KW 8KW 10KW 12KW 15KW
Rated voltage 380/220, 400/230, 220V, etc.
Rated current According to the selected voltage and phase
Rated frequency 50HZ
Rated speed (rpm) 1500
Power factor 1 for single phase/0.8 lagging for 3-phase
Phase connection single phase or three phase
Winding connection 3 or 4 -wire connected(12-wire for 3-phase)
E*citation method Brushless
Voltage regulation AVR
CONTROL PANEL V-meter,A-meter,Frequency meter , circuit breaker,transfer switch,AVR, temp. and pressure gauges, lighter,hour meter, key starter, etc.
G/N. WET(kg) 320 360 380 420 440
PACKING SIZE (cm) 135*52*56 135*52*56 140*71*76 140*71*76 140*74*78
[ Back ]